Post by justin on Jul 27, 2013 12:13:17 GMT
The iTaste VV is a microprocessor controlled variable-voltage/ variable-wattage (VV/VW) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses. This article is a simple tutorial on how to use this device.
There are three main buttons on the iTaste VV: “ ” button, "+" button and "-" button; all the functions can be activated by using those three buttons to change settings in one step, your chosen mode will be displayed on the digital screen.
Turn on/off the device:
Quickly clicking “ ” button three times will turn the batteryor or off. Once enabled, holding down the button will activate the battery
Adjust variable voltage
Hold the “-” button first and then holding “ ” button for two seconds to enter variable voltage mode. The digital screen will show the puff count first, then the last setting used (in voltage or wattage). Voltage can be adjusted from 3.3 to 5.0 volts in 0.1 volt increments by pressing the “+” and “-” button.
Adjust variable wattage
Hold the “+” button first and then holding “ ” button for two seconds to enter variable wattage mode. The digital screen will show the puff count first , then the last setting used (in voltage or wattage). Wattage can be adjusted from 6.0W to 11.0W in 0.5 watts increments by pressing the “+” and “-” button.
Ohms Meter
Hold both the “+” and “-” buttons simultaneously for seconds. The screen will show a series of readings, the first being the resistance of the attached load, the second being the battery voltage, the third being the number of puffs since the device was last turned off and the fourth being the last set voltage or wattage. If not load is attached the display with show “NON”. If you wish to check the number of puffs taken since the iTaste VV was last turned off, you can also hold either the “+” or the “-” button to display the Puff Counter which will be followed by the display of current mode (VV mode or VW mode). In this state, you can also adjust the voltage or wattage by pressing the “+” or “-” button.
There are three main buttons on the iTaste VV: “ ” button, "+" button and "-" button; all the functions can be activated by using those three buttons to change settings in one step, your chosen mode will be displayed on the digital screen.
Turn on/off the device:
Quickly clicking “ ” button three times will turn the batteryor or off. Once enabled, holding down the button will activate the battery
Adjust variable voltage
Hold the “-” button first and then holding “ ” button for two seconds to enter variable voltage mode. The digital screen will show the puff count first, then the last setting used (in voltage or wattage). Voltage can be adjusted from 3.3 to 5.0 volts in 0.1 volt increments by pressing the “+” and “-” button.
Adjust variable wattage
Hold the “+” button first and then holding “ ” button for two seconds to enter variable wattage mode. The digital screen will show the puff count first , then the last setting used (in voltage or wattage). Wattage can be adjusted from 6.0W to 11.0W in 0.5 watts increments by pressing the “+” and “-” button.
Ohms Meter
Hold both the “+” and “-” buttons simultaneously for seconds. The screen will show a series of readings, the first being the resistance of the attached load, the second being the battery voltage, the third being the number of puffs since the device was last turned off and the fourth being the last set voltage or wattage. If not load is attached the display with show “NON”. If you wish to check the number of puffs taken since the iTaste VV was last turned off, you can also hold either the “+” or the “-” button to display the Puff Counter which will be followed by the display of current mode (VV mode or VW mode). In this state, you can also adjust the voltage or wattage by pressing the “+” or “-” button.
